Dump Hoist Hydraulic Pumps, Winch Hydraulic Motors, Hydraulic Hoses and more. Military Dump Truck and Military Wrecker / Recovery Vehicle Hydraulic Pumps. M51, M51A2, M342A2, M47, M59, M817, M929, and M917 Military Dump Truck Parts. M543, M543A2, M816, M936, M936A1, M936A2 Military Wrecker Truck Parts for sale.
Dump Hoist Hydraulic Pump Shaft Shouldered with Spur Gear. Used on M39 and M809 Series 5-Ton Military 6x6 Dump Trucks
Power Takeoff PTO With Hydraulic Pump. Removed from working Truck. In good used and serviceable condition. Fits M916, M917 and M920
Hydraulic Pump. Used on M916, M917 and M920
Woodruff Key for the output shaft on the PTO Accessory Drive on M39, and M809 Series Dump Trucks. Used to Couple the Hydraulic Pump Shaft to the Power Take Off
1" Hydraulic Flange O-Ring for Military Trucks and Forklifts. Fits M939 Dump Trucks or Trucks with Front Winch.
1.5" Hydraulic Flange O-Ring for Military Trucks and Forklifts. Fits M939 Dump Trucks and M939 Trucks with a Front Winch.
Not in Parts Books. Seals the shaft on M543, M809 and M936 Military Wrecker Hydraulic Motors that drive the Turntable and Hoist Winch
Hydraulic Motor for Wrecker Bed. Used on M39 / M54, M809 and M939 Series 5-Ton Military Wrecker / Recovery Vehicles
Hydraulic Tank (Reservoir) Spin-on Hydraulic Filter. Fits M911 C-HET Oshkosh Truck Corporation
Hydraulic Tank Sight Glass used on Winch Hydraulic System Tank on M916, M920 and other M915 Series Military Vehicles.
Power Steering Hose for M998 HMMWV
Re-built Power Steering Pump. Fits M939 Series 5-Ton Military Vehicles. Does not fit M939A2 Models. Bracket in photos is not included. Re-fundable $100 Core Charge when old pump is returned
Re-Built Power Steering Pump for M939 Series 6x6 Military Trucks. Pump only without Pulley. Refundable $100 Core Charge when old pump is returned. Used Servicable are take-offs from running trucks.
Power Steering Pump Bracket. Used on M809 and M939 Series 5 Ton Military Vehicles with Cummins NHC250 Diesel Engine. Does not fit M939A2 Vehicles with Cummins 6CTA8.3 Turbo charged Engine
Power Steering Filter and Seal Kit for M809 and M939 Series Military Trucks
1" Hydraulic Split Flange Clamp Half. Referenced in TM for M520, M877, M553 and M559. (TM 9-2320-233-34P)
PTO to Hydraulic Pump Drive Shaft on M936, M936A1, and M936A2 Military Wrecker/Recovery Trucks.
Wrecker Gondola Hoist Hydraulic Control Valve Seal Kit. Used on M543, M816, and M936 Military Wrecker/Recovery Trucks. 4 kits required to re-seal all four valves. Includes O-rings and backup Washers.
2) MS28775-114 NSN 5330-00-576-3206
2) MS28775-115 NSN 5330-00-579-7916
2) MS28775-117 NSN 5330-00-702-5220
4) MS28774-114 NSN 5330-00-576-3206
2) MS28774-115 NSN 5330-00-801-3440
1) Drawing Packet
Power Steering Hydraulic Pressure Hose Assembly. Used on M809, M939 and M939A1 Series 5-Ton Military Vehicles. Does not Fit M939A2 Series Trucks
Power Divider Hydraulic Output Shaft Bevel Yoke for M816 and M543 Military Wrecker/Recovery Vehicles.