Winches, Winch Cable Rollers, Bearings, Winch Motors, Winch Clevis Sockets, and Snatch Blocks. Repair parts for 6x6 Army Trucks. M813A1, M817, M925, M928, M932 5 Ton Trucks and more.
Front Winch Rigid Shaft Coupling for M35A3, M35A3C and M36A3 2.5 Ton Military Trucks with front winch.
3-Ton Cable Pulley Snatch Block. 1/4 inch wire rope. Basic Issue Item for M1070 Military HET.
Logging Winching Towing Utility Chain 5/8 inch link 14 feet long. Has hook on one end and loop on the other. New Old Stock Basic Issue Item for M1070 Military HET. The chains are all unused, however some of them do have minor surface rust.
Logging Winching Towing Utility Chain 7/8 inch link x 20 feet long. Has hook on one end and loop on the other. Chains listed as used appear to be unused but are listed as used serviceable due to surface rust. Basic Issue Item for M1070 Military HET.
Support Bracket for Winch / PTO Control Lever on M44 / M35 Trucks with PTO.
Power Takeoff / Winch Control Lever for M44 / M35 2.5 Ton Military Trucks with PTO.
Clevis Linkage for PTO / Winch Control on M44 / M35 2.5 Ton Military Trucks with PTO.
Yoke for PTO / Winch Control Linkage on M44 / M35 Series 2.5 Ton Trucks with PTO.
Front Winch DriveShaft Shear Pin. Fits 2.5 ton Military Trucks With Front Winch
Replacement Air Pressure Regulator for Rear Winch Tensioner. Used on Oshkosh Truck M1070 HET Military Truck Tractor
Winch Tensioner Air Pressure Cushion Bag. Used on Rear Hydraulic Winch on Oshkosh Truck M1070 HET Military Truck Tractor
Needle Roller Bearing for Front Winch Tensioner on 5 Ton Military Wreckers. See parts diagram below in more info
Coupler Shear Pin for Front Winch on M939, M939A1, and M939A2 Series Military Trucks with Front Winch.
Front Winch Shaft Coupler for M939, M939A1, and M939A2 Series Military Trucks with a Front Winch.
Oil Seal Retainer for Front Winch on M939, M939A1, and M939A2 Series Military Trucks with a Front Winch.
PTO to Hydraulic Pump Drive Shaft on M936, M936A1, and M936A2 Military Wrecker/Recovery Trucks.
Mounting Bracket for Front Winch Hydraulic Motor on M939 Series Military Trucks with a Front Winch.
Left Hand Side Front Winch Mounting Frame Channel for M939 Military Trucks with a Front Winch.
Right Hand Side Front Winch Mounting Frame Channel for M939 Military Trucks with a Front Winch.
Winch Power Divider Hydraulic Output Shaft to Constant Velocity (CV) Joint for M816, M543, M543A1 and M543A2 Military Wrecker. Part of assembly 12300520 NSN 2520-01-102-6908