Winches, Winch Cable Rollers, Bearings, Winch Motors, Winch Clevis Sockets, and Snatch Blocks. Repair parts for 6x6 Army Trucks. M813A1, M817, M925, M928, M932 5 Ton Trucks and more.
45,000 LB Capacity Hydraulic Winch Assembly with Tank and Hydraulic Winch Control Station. Fits M916 and M920 Military Tractor Trucks.
Hydraulic Motor for Front Winch on M939 Series 5 Ton Military Trucks.
Cable Clevis Socket for attaching the cable to the Pulley Block on 5-Ton Military Wreckers and 2 1/2 Ton Front Winch Cable. Used on M44, M39, M809 and M939 Series Military Wreckers or other winching applications using 1/2" Wire Rope. Also used on M756A2. winch.
Front Winch Clevis Socket (5/8") Cable, Fits Winch applications with 5/8" Cable. Used on M39, M54 and M939 Series 5-Ton Military Vehicles with Front Mounted Winch and Bolster Logger Midwinch.
Wrecker Rear Winch Cable Clevis Socket. Fits 3/4" Wire Rope (Cable). Used on Rear 45000 pound Winch and Chain for 5-Ton Military Wrecker Recovery Trucks. Fits other Winching Applications with 3/4" wire Rope.
Push Pull Control Cable for operating the Front Winch on M939 Series Military Trucks
CLEVIS,ROD END. Used on M939 5-Ton Winch Control Cable at Shifter End and 5-Ton Wrecker Governor Air Valve Linkage. Also Used on 6,000 pound Rough Terrain Forklift Throttle Linkage. Has other applications including M977 HEMTT Linkages
Winch Control Cable Rod End Clevis. Used on Hydraulic Valve End of Winch Control Cable. Fits M939 Series 5-Ton Military 6x6 Trucks with Front Mounted Winch
Passenger Side Lower Cable Roller Guide Bracket for Front Winch on All 5-Ton Military Vehicles. M39 / M54, M809 and M939 Series Trucks.
Drivers Side Lower Cable Roller Guide for Front Winch on All 5-Ton Military Vehicles. M39 / M54, M809 and M939 Series Military Trucks.
Front Winch Cable Guide Plate (Old Style). Left and Right Interchangeable. Used on 5-Ton Military Trucks with Front Winch
5 Ton Cable Pulley Snatch Block. Opens to Accept 1/2" Wire Rope / Cable
Dual Cable Snatch Block. 5100# Capacity. See pictures for details.
10 inch, 15 TON Winching Pulley Snatch Block. This Block is Basic Issue for M543, M816 and M936 Military Wrecker / Recovery Vehicles. Used for winching operations using the 45,000 pound Rear Mounted Winch. Used with 3/4" Wire Rope
25 Ton Cable Dual Pulley Snatch Block (7/8" Wire Rope). 8 inch, 25 TON Winching Dual Pulley Snatch Block. This Block is Basic Issue for M543, M816 and M936 Military Wrecker / Recovery Vehicles. Used for winching operations. Used with 7/8" Wire Rope
Unidentified Cable Pulley Snatch Block. Unsure of Capacity. Measures 23" x 12" x 7" and weighs 92 pounds. Pulley measures 1-3/4 inches wide. Cable size is not labeled but would estimate approx 1" wire rope.
Dual Cable Pulley Snatch Block. This Block has not been identified. Capacity is unknown. Item weighs 125 pounds and is Heavy Duty
10 Ton Cable Pulley Snatch Block. Single 8 in. sheave, with hook, 10-ton work load. This Block is Basic Issue for M543, M816 and M936 Military Wrecker / Recovery Vehicles. Used for winching operations using the 20,000 pound Front Mounted Winch. Used with 5/8" Wire Rope. The Snatch Block you receive may vary slightly in appearance depending on the manufacturer.
Wrecker Boom Cable Pulley. Used on M543, M816 and M936 Military Wrecker / Recovery Vehicles
Rear Winch Cable Guide Rollers (Fair Lead) Bearing. Fits M39, M809 and M939 Series 5-Ton Military Trucks