Voltage Regulator / Static Exciters, Relays, Special Relays Boxes, Main Load Contactors, and more. New and Used replacement parts for MEP Military Gensets.
Winch Engage Switch mounted on the Winch Control Station. Fits M911 C-HET Oshkosh Truck Corporation along with other applications
24V Electric Fuel Pump used on Military Generators and Military Vehicle Arctic Kits and Fuel Burning Personnel Heaters. Maximum fuel delivery 33 gallons per hour at free flow. Maximum pressure 6 to 8 psi. May require fittings to conform to your application.
Fuel Sending Unit for 15kW, 30kW, and 60kW Military Generators. See related items below for gasket
Generator End for MEP009A and MEP009B 200kW Generator Set. Picture is a representation of the item and not the specific generator end that you will receive.
Breaker Motor Actuator for MEP007B 100 KW Generator.
Slave Cable Receptacle Plug Connector used on Military Vehicles and Equipment to plug in new style Slave Cable.
Electronic Overspeed Switch. Used on MEP007B Military Diesel Generators
Aluminum Generator Electrical Load Connection 4-Hole Terminal Block Lug. Will Accept up to .93 inch Diameter Wire.
Aluminum Generator Electrical Load Connection 3-Hole Terminal Block Lug. Takes up to .93" wire.
Electrical Load Connection Terminal Lug. Will Accept up to .85 inch Diameter Wire.
Aluminum Electric Service Load Connection Terminal Block Lug (Single Wire). Will Accept up to .70 inch Diameter Wire.
Aluminum Load Connection Terminal Lug (2 Hole). Accepts 0.930" Diameter Cable.
Aluminum Load Connection Terminal Lug (Single Hole). Accepts 0.930" diameter wire.
Aluminum Load Connection Terminal Lug (2 Hole). Accepts 1" diameter wire.
Rectifier Assembly. Used on 15kw, 30KW and 60 Kw military Diesel Generators
Control Panel Relay. Used in Military diesel Generator Sets model Numbers - MEP-812A, MEP-802A, MEP-803A, MEP-813A, MEP-804A, MEP-814A, MEP-805B, MEP-815B, MEP-806A, MEP-816A. See Parts Diagrams below for quantities used in different Models.
Starter Disconnect Control Panel Relay. Used in Military diesel Generator Sets model Numbers - MEP-812A, MEP-802A, MEP-803A, MEP-813A
100KW Generator End Removed from a Parted MEP007B with a bad engine. This Alternator has been Ohmed out and all coils tested good. 12 Lead Re-connectable 3 Phase 120/208 - 277/480. Bellhosing is SAE 1/2...
Model Numbers are located inside the Model Series below. Click on a Model Series to expand that list of Model Numbers. Entering your Model Number into the box below removes any Series/Models that do not apply below.
