Miscellaneous Parts
Pusher Axle Air Pressure Regulator. Used on M917, M919 and M920 Military Trucks to control load bearing on Air Ride Pusher Axle
Passenger Side Air Pressure Tank for M911 and M977 HEMTT. This tank part number shows up as the center tank in the M911 parts diagram which is incorrect. It is mounted on the passenger side.
Pin for Control Linkages on Military Trucks and Equipment. Used to attach Clevis and Yokes to Control arms
Pin for Control Linkages on Military Trucks and Equipment. Used to attach Clevis and Yokes to Control arms
Front Winch Clevis Socket (5/8") Cable, Fits Winch applications with 5/8" Cable. Used on M39, M54 and M939 Series 5-Ton Military Vehicles with Front Mounted Winch and Bolster Logger Midwinch.
Wrecker Rear Winch Cable Clevis Socket. Fits 3/4" Wire Rope (Cable). Used on Rear 45000 pound Winch and Chain for 5-Ton Military Wrecker Recovery Trucks. Fits other Winching Applications with 3/4" wire Rope.
Air Valve to activate Engine Speed Governor on Military 5-Ton Wrecker / Recovery Trucks When Bed Hydraulic System is active. Fits M39, M809 and M939 Series Wreckers
Woodruff Key for Alternator and Generator Pulleys on Most Military Vehicles. Also used in other various applications
Alternator Mounting Bracket. Used on 2.5 ton and 5 ton 6x6 Military Trucks with LDT-465 and LDS-427 Multi-Fuel Diesel Engines
Alternator Belt Adjusting Arm Bracket for M809 Series Military Trucks.
Battery Hold Down J-hook. Used on M35, M39, M809 and M939 Series Military 6x6 Trucks
Hook Bolt (J-Bolt) for Attaching the front of Hard Top. Used on M939 Series 5-Ton 6x6 Military Trucks. 2 Required per Vehicle
Hook Sling for securing wrecker hook while driving. Used on 5-Ton Military Wreckers
Not in Parts Books. Seals the shaft on M543, M809 and M936 Military Wrecker Hydraulic Motors that drive the Turntable and Hoist Winch
Basic Issue Items for Military Wreckers. See Photos parts included.
Crane Boom Support to Ground Base Pad for 5 Ton Military Wrecker/Recovery Vehicles.
Wrecker Boom to Ground Support for Military Wrecker/Recover Vehicles.
Outter (bottom bar) : 2540-00-040-2301
Inner (top bar): 2540-00-040-2300
Wrecker Boom To Chassis Support for Military Wrecker/Recovery Vehicles. Includes inner pipe part # 10910347
Parking Brake Knob. Used on M915 Series and M911 Oshkosh Truck Corporation C-HET and Other Vehicles with Air Brakes. Fits Bendix and other valves
Tire Pressure Filler with gauge. Works with any truck with glad hands and on board air system. NOS Shown in pictures. Used items may show wear.