$364.80
Automatic Generator Flashing Unit SS550
Automatic Generator Field Flashing Unit. Works with 12 or 24 Volt Systems (12V or 24V)
The SS500 Automatic Flashing Module is a true electronic flashing circuit with a latching timeout circuit that can be set from 1 to 8 seconds timer. This unit will not flash again as the generator is turned off. When the residual voltage is too low for the voltage regulator to build voltage normally on the generator the SS500 is what you need. The SS500 uses battery voltage and the output of the generator to automatically flash the generator for 1 to 8 seconds and then stop. The cycle is repeated every time you start the generator, normally a signal from the ignition switch or any convenient oil pressure sender or push button start the sequence. Current limiting resistors and safety diodes are included .
This item fits the following series and models of equipment:
100kW
MEP007A , MEP106A , MEP116A
100kW B
MEP007B
15kW
MEP004A , MEP004A KZOOO1 thru Z01226 , MEP103A , MEP113A , MEP113A Serial Numbers RZ60001 and subs
200kW
MEP009A , MEP108A
200kW B
MEP009B
30kW
MEP005A , MEP005A Serial Numbers KZ00001 thru KZ02752 , MEP104A , MEP104A Serial Numbers KZ00001 thru KZ02752 , MEP114A , MEP114A Serial Numbers RZ70001 and sub.
60kW
MEP006A , MEP105A , MEP115A